User guide

[e-mail] Fax [phone]
53
Pin Function In/Out
1 VCC 5V -
2 Phase Output 1 O
3 Phase Output 2 O
4 Phase Output 3 O
5 Phase Output 4 O
6 Phase Output 5 O
7 Phase Output 6 O
8 Phase Output 7 O
9 Phase Output 8 O
10 GND -
11 BCD Unit 1 I
12 BCD Unit 2 I
13 BCD Unit 4 I
14 BCD Unit 8 (msb) I
15 BCD Ten 1 I
16 BCD Ten 2 I
17 BCD Ten 4 I
18 BCD Ten 8 (msb) -
19 Osc1 (16MHz crystal) -
20 Osc2 (16MHz crystal) -
21 Preheat (On=Hi) I
22 DMX512 TTL Receive I
23 Select 1 I
24 Good Rx (Open Collector, Lo=Good) O
25 Select 0 I
26 Zero Cross (Active Lo) I
27 Test (Connect to GND) I
28 BCD Hundred 4 I
29 BCD Hundred 2 I
30 BCD Hundred 1 I
31 GND -
32 MCLR (Connect to VCC) I
33 Phase Output 16 O
34 Phase Output 15 O
35 Phase Output 14 O
36 Phase Output 13 O
37 Phase Output 12 O
38 Phase Output 11 O
39 Phase Output 10 O
40 Phase Output 9 O
Pin
Functions
Phase
Outputs
The AL4016 phase outputs are synchronised to the zero cross
input signal over a frequency range of 45Hz to 65Hz. The
output phase trigger position is defined by the DMX512 input
level and modified by a square law curve. When driving a
thyristor load, this arrangement provides a linear variation in
the load power for a linear variation of the DMX512 input
level.