Specifications

109 Signametrics
int status = DMMSetSynchronized(0, FALSE); // Cancell sync.
DMMSetTCType
SMX2040 ; SM X2044
Description mocou
int SetTCType(int nDmm, int iType)
Remarks This function selects the thermocouple type to be measured and linearized. It must be one
Parame
Example
X2042 ; SM ;
Set Ther ple type .
#include "sm204032.h"
#include "UserDMM.h"
DMM
of the following: B, E, J, K, N, R, S or T.
ter
Type/Description
NDmm
int Identifies the DMM. DMMs are numbered starting with zero.
iTempUnits
int The thermocouple type to be selected. This value can be set from
Return Value
Value
BTyppe to TType as defined in the UserDMM.H file
.
The return value is one of the following constants.
Meaning
OKAY
Function succeeded.
e Value
Error code
int status = DMMSetTCType(0, NType) // select N type TC
Units
; SMX2044 ;
DMM_
Negativ
Example
DMMSetTemp
MX2040 ; SMX2042
Description
lude "User
int DMMSetTe
Remarks This function se
on-board tempe
eter
S
Set temperature units to °C or °F.
#include "sm204032.h"
#inc DMM.h"
mpUnits(int nDmm, int iTempUnits)
ts the temperature units to either °C or °F. This is applicable to both the
rature sensor and the RTD measurements.
Param
Type/Description
int Identifies the DMM. DMMs are numbered st
nDmm
arting with zero.
iTempUn
°F, or DEG_C for °C.
°C.
its
int Temperature units can be either DEG_F for
The default is
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com