Installation guide
HARDWARE KIT
15. Mounting Screw Selection
15.1. Thread Pitch: M4, M5, M6, M8, or M10.
15.1.1. Match the threads
in
the FPTV chassis to one from the kit.
15.2. Screw Length: 13,
18
or 25 mm.
15.2.1. First, check the thread depth of the mounting points
on
the FPTV.
15.2.2. Select a length that will accommodate the Thin UMB (Depth =7mm), third
party wall-mount, and washers. Allow for 5 - 8 mm of screw threads into the FPTV
chassis.
Be
sure to account for the maximum thread depth into the TV.
NOTE:
For
tablestand
installations
without
additional
mounting
hardware,
select
the
smallest
length,
13
mm.
16. Collar Washers: M4, M5, M6 or M8.
16.1. The collar washer will fit snugly around your selected machine screw and fill
the excess area
in
the slot
of
the Thin UMB. NOTE:
Collar
washers
are NOT
needed
for
M10
screw.
17. Flat Washer: Select a washer that fits around the selected Mounting Screw.
18. Using the selected components from Steps
1.1
& 1.2., refer to FIGURES 9 & 10
to
assemble the components to the FPTV chassis. NOTE:
Tighten
all
hardware
securely.
19. Attach the FPTV to the wall.
9