Installation guide

GRILLE INSTALLATION
28. Grilles are held to the speaker by Hook and Loop fasteners, commonly known as
Velcro®. All LCR
OM Grilles have 2 large hook pads. The woofer motors have the
Loop surface.
29. Align the grille with the top and bottom edges
of the FPTV, directly over the face of
the speaker baffle.
30. Press the grille firmly onto the woofer motor surfaces.
31. The grille can
be removed easily by simply pulling on the grille to separate the Velcro
pads.
32. Perform final adjustment to the speaker's front / back alignment using the
thumbscrews. The grille edge should match the bezel height
of the FPTV as shown
in Figures 1-6.
14