Spec Sheet

ARTP-SB2
UNIT
14 1/4"
INCLUDES
ADAPTER
12 3/8"
10 1/16"
1 3/16"
ELECTRICAL
CORD 8 FT.
NEMA 5-15
90° PLUG
26 1/4"
14 1/4"
INCLUDES
ADAPTER
9/16"
POWER
CORD
ARTPC-SB2M ADAPTER
PLATE INSTALLED
10 1/16"
26 1/4"
21 13/16"
9/16"
POWER
CORD
3/4"
ARTP-SB2 TYPICAL DIMENSIONS
10 1/16"
35 15/16"
14 1/4"
THE RIGHT OR LEFT SIDE
SHELF FROM THE CART
MUST BE REMOVED FOR
THE ARTP-SB2 DUAL SIDE
BURNER INSTALLATION.
ARTP CART INSTALLATION DIMENSIONS
ARTPC-SB2M KIT COMPONENTS
INTERFACE
MOUNT PLATE
BACK BRACKET
REAR
COVER
SIDE COVER
FITTINGS AND FASTENERS
TYPICAL ARTPC-SB2M INSTALLATION
SHOWN INSTALLED ON RIGHT SIDE OF ARTP-32C UNIT
NOTE:
THE ARTPC-SB2M IS THE INTERFACE KIT THAT MOUNTS AND CONNECTS AN ARTP-SB2 DUAL SIDE BURNER UNIT TO THE ARTP CART (ARTP-32C MODEL
SHOWN AS EXAMPLE). IT CAN BE MOUNTED ON THE LEFT OR RIGHT SIDE OF THE CART.
THE ARTPC-SB2M KIT COMES WITH SIDE AND BACK PANELS THAT CAN BE USED TO CLOSE THE PERIMETER OF AN ARTP-SB2 BURNER WHEN IT IS
MOUNTED TO ARTP CART.
(REFER TO ARTPC-SB2M INSTALLATION MANUAL FOR MORE INFORMATION)
THE ARTP-SB2 UNIT SHOWN ABOVE IS NOT INCLUDED. THE ARTP-SB2 UNIT IS SUPPLIED WITH ALL THE REQUIRED STAINLESS FLEX HOSES AND
FITTINGS NECESSARY FOR INSTALLATION.
(REFER TO THE ARTP-SB2 INSTALLATION MANUAL FOR ADDITIONAL INFORMATION).
SUPERIOR EQUIPMENT SOLUTIONS
1085 BIXBY DRIVE
CITY OF INDUSTRY, CA. 91745
DRAWING NO.: PROJECT TITLE:
DRAWING TITLE:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SUPERIOR EQUIPMENT SOLUTIONS
INC. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT WRITTEN PERMISSION FROM SUPERIOR
EQUIPMENT SOLUTIONS, INC. IS PROHIBITED.
ARTPC-SB2M SPEC SHEET
SHEET 1 OF 1
SPEC SHEETS
ARTPC-SB2M SPECIFICATION SHEET
LAST SAVED BY: »» Adrian «« Wednesday, October 10, 2018 2:37:36 PM
DRAWN BY: ADRIAN CRISCI
CREATED: 9/13/2018 10:22:58 AM
Artisan
TM