Specifications

Alarms
To En able Audio
Alarms
The channels for which you enable alarms
trigger your previously defined alarm
responses.
1. Press the SETTINGS button on the front
panel and then press IO Bar and Config.
2. Press the soft key of the Audio I/O type
that you want to configure.
3. Check (or clear) the boxes in the Current
Bar Configuration m enu located at the
bottom of the screen. This will enable (or
disable) the alarm for the specified input.
4. Repeat steps 2 and 3 for each audio
input type you intend to use.
66 AMM768 Quick Start User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com