Specifications

How to Operate Yo
ur Instrument
9. If you will use SNMP commands with the
audio monitor, touch the SNMP Setup
soft key.
Change the settings based on your requirements:
SNMP Traps: This setting allows you to turn on or off the capability of the audio monitor to generate SNMP traps.
SNMP Public Comm. String: This setting specifies the string that S NMP commands must include to have r ead-only
access. The default public community string is “public”. If you enter a new string, the audio monitor will strip any leading
or trailing spaces in the string: for example, “ my stuff ” will become “my stuff”. The public community string cannot be
blank. If you input a blank string, the instrument will set it to the default string.
SNMP Private Comm. String: This setting specifies the string that SNMP commands must include to have read/write
access. The default private community string is “private”. If you enter a new string, the audio monitor will s trip any leading
or trailing spaces in the string: for example, “ my stuff ” will become “my stuff”. The private community string cannot be
blank. If you input a blank string, the instrument will set it to the default string.
Trap Destination 1–4 Address: These settings allow you to set IP addresses to which SNMP traps are s ent.
Remote SNMP Mode: This setting enables you to allow or deny remote control access to the audio monitor over a
network. You can still access the audio monitor using the Web Interface when this setting is Disabled, but you will not
be able to v iew or change instrument settings using SNMP management software. If this setting is Read Only, you can
view instrument settings but not change them. If this setting is Enabled, you can view and change instrument settings
using SNMP management software.
10. P ress the Close soft keys to close the
submenus.
52 AMM768 Quick Start User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com