Specifications

How to Operate Yo
ur Instrument
Rear-Panel Connectors
The following figures shows the audio monitor rear panel with optional connectors.
Power Requirements
A single-phase power source with one
current-carrying conductor at or near
earth-ground (the neutral conductor).
The power source frequency must be
50 or 60 Hz, and an operating voltage
range must be from 100 to 240 VAC,
continuous.
Systems with both current-carrying
conductors live with respect to ground
(such as phase-to-phase in multiphase
systems) are not recommended as
power sources.
NOTE. Only the line conductor is fused for
over-current protection. The fuse is internal.
Video Input Connectors
1. S DI A. The Digital A component serial
digital input.
2. S DI B. The Digital B component serial
digital input.
3. SDI Out. Reclocked loop-through of the
active SDI input.
30 AMM768 Quick Start User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com