Specifications

Remote Communic

ations

Remote Commun

ications

Remote communications that are covered here include those that are:

Over an Ethernet network through a Web browser.

Over an Ethernet network through a Java applet.

Using the Remote Web Interface

You can connect to the audio monitor and perform simple operations using just a Web browser, without installing any

software. To use a Web browser to connect to an audio monitor, the audio monitor must be connected to an IP network

via Ethernet.

You will need to set the IP Conﬁg Mode, IP Address, Subnet Mask, and possibly the Gateway Address,

depending on your network conﬁguration.

Using just a Web browser, y ou can save screen captures, download the error log, download the diagnostics log, and view

the instrument options. To connect to the audio monitor using a Web browser:

1. S et up the aud

io monitor to connect to

a network (if you have not already done

so).

2. Start your Web browser and type

the network

address of the audio

monitor into the URL entry box like this:

http://123.123.123.123

NOTE. Many

Web browsers do not

correctly interpret IP addresses with leading

zeros. If the IP address shown in the

Conﬁgurat

ion menu contains leading zeros

as in 124.161.038.151, remove the "0" when

entering it into the address line of the browser.

For examp

le, 124.161.038.151 should be

entered as 124.161.38.151.

90 AMM768 Quick Start User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com