MSDS

ManualsBrandsArtisan ManualsPaint5-gal. Efflorescence Remover

MATERIAL SAFETY DATA SHEET

Artisan Efflorescence Remover

Page 1 of 5

SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Product Name: Artisan Efflorescence Remover

Product Number:

Manufacturer:

Chemique, Inc.

315 N. Washington Avenue

Moorestown, NJ 08057

(856) 235-4161

MSDS Date of Preparation: 2/14/11

EMERGENCY PHONE: (800) 535-5053 (Infotrac)

SECTION 2: HAZARDS IDENTIFICATION

This product is a clear, amber liquid with a mild odor.

EMERGENCY OVERVIEW

DANGER! CORROSIVE!

Contact with the eyes will cause burns with possible eye damage. Skin contact may cause mild

irritation. Prolonged skin contact may cause drying, defatting or dermatitis. Harmful or fatal if

swallowed.

SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#.

WT.%

Surfactant

Proprietary

Organic Acid Salt

Mixture

Water 7732-18-5 58

SECTION 4 FIRST AID MEASURERS

EYE CONTACT: Immediately flush eyes with water for at least 20 minutes while lifting the upper and

lower lids. Get immediate medical attention.

SKIN CONTACT: Immediately wash with soap and water until no trace of the chemical remains.

Remove contaminated clothing and launder before reuse. If irritation develops and persists, get

medical attention.

INHALATION: Remove victim to fresh air. If breathing has stopped give artificial respiration. If

breathing is difficult have qualified personnel administer oxygen. Get medical attention.

Summary of content (5 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Artisan Efflorescence Remover SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION Product Name: Artisan Efflorescence Remover Product Number: Manufacturer: Chemique, Inc. 315 N. Washington Avenue Moorestown, NJ 08057 (856) 235-4161 MSDS Date of Preparation: 2/14/11 EMERGENCY PHONE: (800) 535-5053 (Infotrac) SECTION 2: HAZARDS IDENTIFICATION This product is a clear, amber liquid with a mild odor.
PAGE 2
MATERIAL SAFETY DATA SHEET Artisan Efflorescence Remover INGESTION: Get immediate medical attention. If conscious, rinse mouth with water and give 1-2 glasses of water to dilute. Do not induce vomiting. Never give anything by mouth to a person who is unconscious or convulsing. SECTION 5 FIRE FIGHTENING MEASURES EXTINGUISHING MEDIA: Use water spray, carbon dioxide and dry chemical.
PAGE 3
MATERIAL SAFETY DATA SHEET Artisan Efflorescence Remover RESPIRATORY PROTECTION: None needed under normal use conditions with adequate ventilation. For spray application, use a NIOSH approved dust/mist respirator with appropriate eye protection. A full facepiece respirator provides both eye and respiratory protection. For higher concentrations an approved supplied air respirator (with escape bottle if required) or selfcontained breathing apparatus may be required.
PAGE 4
MATERIAL SAFETY DATA SHEET Artisan Efflorescence Remover SECTION 11 TOXICOLOGICAL INFORMATION HEALTH HAZARDS: INHALATION: Mists may cause mucous membrane and upper respiratory tract irritation with coughing, sore throat and difficulty in breathing. SKIN CONTACT: May cause irritation with redness and drying of the skin. EYE CONTACT: Mists may cause severe irritation or burns with redness, pain, tearing, swelling with possible eye damage.
PAGE 5
MATERIAL SAFETY DATA SHEET Artisan Efflorescence Remover OSHA HAZARD CLASSIFICATION: Corrosive EPA SARA 311 HAZARD CLASSIFICATION: Acute health EPA SARA 313: This product contains the following chemicals regulated under SARA Title III, section 313: None CERCLA Hazardous Substances (Section 103)/RQ: This product is not subject to CERCLA reporting requirements as it is sold. Many states have more stringent release reporting requirements. Report spills required under federal, state and local regulations.