MSDS

ManualsBrandsArtisan ManualsPaint5-gal. Safer Heavy Duty Masonry Rust Remover

MATERIAL SAFETY DATA SHEET

Artisan Heavy Duty Rust Remover

Page 1 of 7

SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Product Name: Artisan Heavy Duty Rust Remover

Manufacturer:

Chemique, Inc.

315 N. Washington Avenue

Moorestown, NJ 08057

(856) 235-4161

MSDS Date of Preparation: 08/30/11

EMERGENCY PHONE: (800) 535-5053 (Infotrac)

SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENTS

CAS#.

WT.%

Ammonium Bifluoride

1341-49-7

28%

Ammonium Hydroxide

1336-21-6

0.5

Phosphoric Acid

7664-38-2

4.5

Water 7732-18-5 67

SECTION 3: HAZARDS IDENTIFICATION

This product is an orange liquid with a mild odor.

EMERGENCY OVERVIEW

DANGER!

Corrosive. Causes severe burns to the eye, skin and mucous membranes. Burns may not be

immediately painful or visible. Can be absorbed through the skin in fatal amounts. Inhalation may

cause respiratory irritation or burns with coughing or labored breathing. Symptoms may be

delayed. May be fatal if inhaled or swallowed. May cause chronic effects. . Medical treatment

is required for all incidents of contact or exposure

HEALTH HAZARDS:

INHALATION: Mist and vapors may cause respiratory irritation or burns with coughing and labored

breathing. May cause fluoride poisoning with effects similar to those listed under “ingestion”.

Symptoms may be delayed. May be fatal if inhaled in large amounts. . Medical treatment

if required for all incidents of contact or exposure

SKIN CONTACT: Contact may cause severe irritation or burns to the skin. Burns may not be

immediately painful or visible. May be absorbed through the skin resulting in potentially fatal

hypocalcemia. Treat all contact immediately and get medical attention.

Summary of content (7 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Artisan Heavy Duty Rust Remover SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION Product Name: Artisan Heavy Duty Rust Remover Manufacturer: Chemique, Inc. 315 N. Washington Avenue Moorestown, NJ 08057 (856) 235-4161 MSDS Date of Preparation: 08/30/11 EMERGENCY PHONE: (800) 535-5053 (Infotrac) SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTS Ammonium Bifluoride Ammonium Hydroxide Phosphoric Acid Water CAS#. 1341-49-7 1336-21-6 7664-38-2 7732-18-5 WT.% 28% 0.5 4.
PAGE 2
MATERIAL SAFETY DATA SHEET Artisan Heavy Duty Rust Remover EYE CONTACT: Contact may cause severe irritation or burns with redness, pain and swelling. Permanent damage and blindness may occur. INGESTION: Swallowing may cause gastrointestinal irritation or burns, nausea, vomiting and abdominal pain. May cause fluoride poisoning with symptoms including weakness, tremors, shallow breathing, spasms of the hands and feet, convulsions and coma.
PAGE 3
MATERIAL SAFETY DATA SHEET Artisan Heavy Duty Rust Remover patient for oral and GI burns. For inhalation: Monitor for respiratory distress. Respiratory symptoms may be delayed up to 24 hours. SECTION 5 FIRE FIGHTENING MEASURES FLASH POINT: Non-flammable FLAMMABLE LIMITS: (vol % in air) LEL – N/A UEL – N/A AUTOIGNITION TEMPERATURE: Not applicable EXTINGUISHING MEDIA: Use any media appropriate for surrounding fire.
PAGE 4
MATERIAL SAFETY DATA SHEET Artisan Heavy Duty Rust Remover SECTION 8 EXPOSURE CONTROLS and PERSONAL PROTECTION Exposure Guidelines: INGREDIENTS Ammonium Bifluoride CAS#. 1341-49-7 Ammonium Hydroxide Phosphoric Acid 1336-21-6 7664-38-2 EXPOSURE LIMITS 2.5 mg/m3 TWA OSHA PEL (as Fluoride) 2.
PAGE 5
MATERIAL SAFETY DATA SHEET Artisan Heavy Duty Rust Remover SECTION 10 STABILITY and REACTIVITY STABILITY: This material is stable. CONDITIONS TO AVOID: Contact with metals and alkalies may release flammable hydrogen gas. INCOMPATIBILITY: Avoid acids, alkalies, caustics, sulfides, cyanides, organic peroxides, halogenated organics. Reacts with acids to liberate toxic and corrosive hydrogen fluoride. Reacts with bases to liberate ammonia. Mixtures with nitromethanes may be explosive.
PAGE 6
MATERIAL SAFETY DATA SHEET Artisan Heavy Duty Rust Remover SECTION 13: DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD: Dispose in accordance with all local, state and federal regulations. SECTION 14: TRANSPORT INFORMATION DOT SHIPPING NAME: Corrosive Liquid, Toxic n.o.s. (Ammonium Hydrogendifluoride, Phosphoric Acid), 8 (6.1), UN2922, PGII DOT HAZARD CLASSIFICATION: Corrosive Liquid, Toxic DOT LABELS REQUIRED (49CFR172.
PAGE 7
MATERIAL SAFETY DATA SHEET Artisan Heavy Duty Rust Remover SECTION 16: OTHER INFORMATION NFPA Rating: Health: 3 Fire: 0 Reactivity: 0 Page 7 of 7