MSDS

MATERIAL SAFETY DATA SHEET
Artisan ENHANCE Penetrating Color Enhancer & Repellent
Page 2 of 5
SECTION 4 FIRST AID MEASURERS
EYE CONTACT: Immediately flush eyes with water for 15 minutes while lifting the upper and lower
lids. Get medical attention if irritation persists.
SKIN CONTACT: Wash with soap and water. Remove contaminated clothing and launder before
reuse. Get medical attention if irritation or symptoms of exposure develop.
INHALATION: Remove victim to fresh air. If breathing is difficult have qualified personnel administer
oxygen. Get medical attention if irritation or symptoms persist.
INGESTION: If conscious, rinse mouth out with water. Do not induce vomiting. Never give anything
by mouth to a person who is unconscious or convulsing. Get medical attention.
SECTION 5 FIRE FIGHTENING MEASURES
FLASH POINT: >200°F
FLAMMABLE LIMITS: (vol % in air) LEL – N/A UEL – N/A
AUTOIGNITION TEMPERATURE: Not applicable
EXTINGUISHING MEDIA: Use any media appropriate for surrounding fire.
SPECIAL FIREFIGHTING PROCEDURES: Firefighters should wear full emergency equipment and
NIOSH approved positive pressure self-contained breathing apparatus.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Thermal decomposition may yield carbon oxides,
nitrogen oxides, aldehydes and other products of incomplete combustion.
SECTION 6 ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Wear appropriate
protective clothing and equipment to prevent contact. Dike spill and collect into closable containers
for disposal with an inert absorbent. Prevent spill from entering sewers and waterways. Wash spill
area with soap and water.
SECTION 7 HANDLING and STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep container tightly closed. Store
in a cool, well ventilated area.
Avoid eye and prolonged skin contact. Avoid breathing vapors or mists. Do not swallow. Use with
adequate ventilation. Remove and launder contaminated clothing before re-use. Wash thoroughly
after handling.
OTHER PRECAUTIONS: Empty containers retain product residues. Follow all MSDS precautions in
handling empty containers.