Specifications

MODEL 370 REV: D Page 2 of 26

CAUTION

Each Model 370 is calibrated at the factory for specific detector and accessories included with the

instrument. Do not substitute different detector or accessories without verifying that the calibration

is installed in the instrument.

The maximum input power level for this instrument, assuming only a radiometric filter is used, is

10mW total or 500mW/ cm

, whichever is less. Beyond these flux levels the detector becomes

nonlinear. Beyond 10mW total or 500mW/cm

there is a risk of irreversible detector damage.

Verify proper line voltage selection prior to operation. See the rear panel switch for line voltage.

Attempted operation at incorrect line voltage will cause catastrophic damage.

Disconnect AC line prior to removal of top cover to avoid electrical shock or accidental damage.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com