Specifications

www.udtinstruments.com
8581 Aero Drive - San Diego, CA 92123 ● U.S-A ● [phone] ● Fax [phone]
ADDENDUM: CE MARK EXCLUSIONS
1.
The instrument is not intended for use in high humidity, high pollution, or explosive
environments.
2. The instrument and related accessories are "CE" compliant when operated in the
manufacturer's recommended configuration, and in accordance with the exclusions
described in this addendum. UDT Instruments does not accept responsibility for "CE"
compliance if the instrument is used in a non-recommended configuration.
3. All semiconductor devices are susceptible to electrostatic discharges (ESD). Ensure that
the unit is switched off before connecting or disconnecting any cable(s) or accessories.
Failure to do so can cause "ESD" damage and reduce the lifetime of the instrument
drastically.
4. Units with ieee-488 capability must use a shielded cable; similar to Hewlett-Packard part
number HP10833x or Io-Tech part number CA-7-X, to maintain compliance.
5. All coaxial cables must be less than 3 meters long.
6. All battery-operated units have batteries that are not replaceable by the customer, and can
only be charged with the battery charger supplied with the unit by UDT Instruments.
7. Cleaning: Special care must be used when cleaning the instrument. The body, or any
labels, should only be cleaned with a soft damp cloth, and a very light concentration of
mild soap. Failure to do so may scratch the surface or damage any anti-glare coatings.
Never use alcohol, acetone, or other chemical solvents to clean any part of the unit.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com