Specifications

Installation

Slide ten

mL RVs between the aluminum heating plate and spring loaded insulators

on the Reactor Unit. Press them down over the male Teflon RV fittings on the Lower

Drain Manifold. Do not attempt to fully seat the RVs at this time.

Place the Reaction Vessel Insertion Tool on top of the

as shown in

Figure

Aligning the Reaction Vessel Insertion Tool with the

Press down on the RV with the RV Insertion Tool to seat the RV over the male

Teflon RV fitting of the Lower Drain Manifold

(Figure

9).

Argonaut Technologies

Part

Number 102298

Figure 9. Seating the RV with the RV Insertion Tool

04/02/98

Quest Tutorial

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com