Specifications

Notices
Subject Matter
The material contained in this document is subject to change without
notice. AGILENT TECHNOLOGIES MAKES NO WARRANTY OF ANY
KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Agilent Technologies
shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance or
use of this material.
Agilent Technologies assumes no responsibility for the use or reliability of
its software on equipment that is not furnished by Agilent Technologies.
Restricted Rights Legend
If Software is for use in the performance of a U.S. Government contract or
subcontract, Software is delivered and licensed as "Comercial computer
software" as defined in DFAR 252.227-7014 (June 1995), or as a
"commercial item" as defined in FAR 52.227-19 (June 1987) or any
equivalent agency regulation or contract clause. Use, duplication of
Software is subject to Agilent Technologies’ standard commercial license
terms, and non-DOD Department and Agencies of the U.S. Government
will receive no greater than Restricted Rights as defined in FAR
52.227-19(c)(1-2)(June 1987). U.S. Government users will receive no
greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or
DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical
data. Copyright © 200X Agilent Technologies Inc. All Rights Reserved.
Certification
Agilent Technologies certifies that this product met its published specifications at the time
of shipment from the factory. Agilent Technologies further certifies that its calibration
measurements are traceable to the United States National Bureau of Standards, to the
extent allowed by the Bureau’s calibration facility, and to the calibration facilities of other
International Standards Organization members.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com