Specifications

:RPRotocol?
:RSARea?
:RSTB?
:SLModid? <
enable>,<modid> (0-127)
:SUModid? <
enable>,<modid> (0-63)
:RESPonse?
:CONFigure:CTABle VXI:CONFigure:CTABle <address> links a user-defined commander/
servant hierarchy table to the command module (resource manager)
processor. The command module must be the acting resource manager in
order for the table to be implemented.
Parameters
Parameter
Name
Parameter
Type Range of Values
Default
Units
<address>
numeric (DIAG:NRAM:ADDR?) none
Comments • Be certain that address specifies the starting address of the area in
user RAM (allocated using
DIAG:NRAM:CREate) where you stored
the commander/servant hierarchy table.
• Tables must start on an even address. Note that
DIAG:NRAM:CREate allocates RAM for the table with
an even starting address.
• < address> may be specified in decimal, hex (#H), octal (#Q), or
binary (
#B) formats.
• Setting address to 0 (zero) prevents the parameters defined by the
table from being invoked when the system is rebooted, however, the
table remains in user RAM.
• For more information see “User-Defined Commander/Servant
Hierarchies” on page 39.
• Related Commands: DIAGnostic:NRAM:CREate,
DIAGnostic:NRAM:ADDRess?, DIAGnostic:DOWNload,
VXI:CONF:CTABle?
Example Link a Commander/Servant Hierarchy Table to the Processor
DIAG:NRAM:CRE <size> Allocate space for table in user RAM.
DIAG:BOOT Reboot system to complete
allocation.
DIAG:NRAM:ADDR? Get starting address of table
(RAM segment).
DIAG:DOWN <address>,<data> Download data into table.
VXI:CONF:CTABle <address> Link table to processor.
DIAG:BOOT Reboot system to implement table.
186 HP E1406A Command Reference Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com