Owner's Manual

GAS CONNECTION - NATURAL GAS (NG):

NOTE: THIS APPLIES TO NATURAL GAS MODELS ONLY. FOR LP MODELS, SEE PAGE 6.

NEVER CONNECT THE APPLIANCE TO AN UNREGULATED GAS SUPPLY.

Before proceeding, ensure the unit is fitted for natural gas. Connecting to an improper gas type will result

in poor performance and increased risk of damage or injury. The installation of this appliance must

conform with local codes or, in the absence of local codes, to the national fuel gas code, ANSI Z223.1a-

1988. Installation in Canada must be in accordance with the Standard CAN/ CGA-B149.1 Natural Gas

Installation or CAN/CGA-B149.2, Propane Installation Code.

Manifold pressure with NG: Operating: 4.0” W.C. (.14 PSI)

Non-operating: 4.5” W.C. (.16 PSI)

Optimum pressure: 7.0” W.C. (.25 PSI)

NOTE: To ensure proper heating performance of this appliance, verify that the gas line supply pressure

is adequate (7.0” W.C. supply pressure is preferred) to maintain 4.5” W.C. manifold pressure.

Use a minimum 1/2” ID flex hose to prevent gas starvation.

NATURAL GAS CONNECTION:

Ensure that the service pipe supplying the Grill is fitted with a shut

off valve conveniently positioned and easily accessible as an

emergency gas shutoff.

Your ARTISAN™ Grill for use with Natural Gas comes equipped

with its own regulator which is shipped loose but must be installed.

WARNING

ENSURE THAT THE GAS

SUPPLY HOSE DOES

NOT COME IN CONTACT

WITH THE GRILL BODY

NATURAL GAS

SUPPLY LINE

PART NO. 220-0412

1/2” NPTF TEE

(BRASS)

PART NO. 220-0405

1/2” NPT X 3/8” ODF

NIPPLE (STEEL)

PART NO. 220-0411

1/2” NPT X 3/8” ODF

ELBOW (BRASS)

GAS LINE TO

BARBECUE

BURNERS

TO SIDE BURNER

GAS FLOW TO

SIDE BURNER

SUPPLY LINE

FITTINGS &

PIPE BY

CUSTOMER