User Manual

re.corder owner’s manual
without connection the re.corder will re-enter the standby state to save
power. To let the re.corder turn itself off you have to close the application
or disconnect the re.corder from inside the CONFIGURATION/DEVICES
page (see relevant chapter).
8 Square button: Square button works (when pushed while holding the
CIRCLE button) as an OCTAVE UP button, a STOP button for the upcoming
looper function and a few other mode-specific functions.
9 Triangle button: Triangle button works (when pushed while holding
the CIRCLE one) as OCTAVE DOWN, PLAY looper tracks and other minor
functions when in selected modes.
10 USB recharge port: This is where you plug the recharge cable to
recharge the battery. This USB port does not support any communication.
11 Strap ring: You can put a strap to support your instrument and avoid
falls, bumps and shocks.
12 Note holes: The classic baroque fingering tone holes. Please keep in
mind that, differently from an acoustic recorder, when in digital mode you
should avoid to rest your finger in the immediate vicinity of the hole. The
sensors could detect the finger even if the hole is not intended to be close.
Please see the “Good handling habits” chapter for more information.
13 Thumb hole: The hole which allows to change register/octave. This
hole have two sensors to detect the half hole position to change
register/octave.
The re.corder uses state of the art sensors and algorithms to
understand the player action and react precisely and quickly to any
pressure or touch operations. The re.corder also includes a 3D