User Manual

re.corder owner’s manual
sets the velocity dynamically. This is quite complex to
calculate because the processor has basically very little time
to detect the initial pressure without introducing some kind
of delay in the MIDI message! The consistency of the AUTO
setting may or may not satisfy the player! Give it a try!!! You
just have to press the SEND button to configure the
re.corder.
§ PRESSURE: This is where you choose the curve which
generates the MIDI message that is used to use the dynamic
pressure that you are using during your playing. There are
many different curves (a complete version with curve
pictures of this manual will come soon) which adapts to
different playing style and response expectation. We
suggest to keep the linear one because is, possibly, the most
natural for many recorder player. In the lower part of the
widget you can decide WHERE to send this information. The
re.corder app responds to pressure through the CC#11
(EXPRESSION). If you want to change the CC number or
sending the pressure information to the Channel Aftertouch
MIDI message, you can do it here! Also in this case, to
transfer the config to the re.corder, just press SEND.