User Manual

re.corder owner’s manual
Application Start Up
After the first execution, the app will download the sound bank
from our website. This will take up to a couple of minutes on very
slow connections so check out the percentage counter on the top
left corner of the screen. During this time the app will work but
no sounds will be generated, so we ask you to wait for the
download to end and then restart the application again. This
double passage will be eliminated in following releases of the
app!
After the splash and welcome screens, the first time you open the
re.corder app, you will be presented with the connection page,
asking you to bind the instrument with the app.
As already described in the QuickStart chapter, after having
turned on the recorder, press the ROUND button and click on the
name of the recorder that appears in the right part of the screen
(see pic below)