User's Guide

( MFA12-说明书-英-V4WSW-BRU-WT)
Skylight Breeze humidity switch
User Guide
WSW-BRU-WT
Type
Model
Rated Voltage
Load Power
Product Size
Skylight Breeze humidity switch
WSW-BRU-WT
AC120V~,60Hz
125*80*37.8MM
2(2)A
Safety Notice:
Cut off the power before installation
3
LOAD
Ground
LINE
LINE
37.70 mm
58.90 mm
(3.15 inch)
80mm
(1.48 inch)
(4.92 inch)
125mm
Indicator Light
ON/OFF Button
Face plate
Air intake
Set key cover
17.81 mm
13.24 mm
28 mm
(1.10 inch)
Auto Mode:
When the switches is working in automatic mode, the fan
starts to work when the humidity exceeds the set value.
When the humidity value is lower than the set value,
the fan will stop working after 5 minutes,
Manual mode:
When the button is pressed, the fan operation state can
be switched, and the device will switch to manual mode
at this time.
When the fan is turned on by pressing the button, the fan will
switch to automatic mode after running for a specified time.
When the fan is turned off by pressing the button, it will
switch to automatic mode after 10 minutes.
Time and Humidity Condition Settings:
1. When the time is set to 0, it will not switch to automatic
mode after turning on the light manually.
2. When the humidity condition is set to 0,
the device will not go into automatic mode.
Use wire-nuts to connect switch wires to your home
wires according to remark of switch wires. Confirm
whether the wire are connected tightly
Wiring diagram
Setup Guidelines
Specifications and Dimensions
1
2
Make sure to use this product together with 2A circuit
breaker in the upstream
To avoid risk of electric shock and meal cover accessible,
please make sure an insulating cover plate has been installed
on metal cover before use.
Shenzhen Hidin Technology Co., Ltd
5
4
32
1
Timer(min) Sensitivity
37.8mm
Warning
4
This device complies with part 15 (Classe B)
of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. FCC
warning. Innovation, Science and Economic Development Canada ICES-003 Compliance
Label: CAN ICES-003 (B). IC's warning.
Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.