Instructions / Assembly

Assembly Instructions

ITM NO: LBL5246

No.

Parts

Quantity

○

③

④

1.Remove all parts （ seat-1, back-2, arm pads-3,

accessory-4） from the carton and place them on a

protected surface or carpet.

2.Attach the screws (4) to the left/right side facing arm pad. Insert the arm pads (3) with screws to the seat hole

directly, then gently pull it to the outside. Make sure the left/right arm pads set leveled.

PAGE 1
Assembly Instructions ITM NO: LBL5246 1.Remove all parts （ seat-1, back-2, arm pads-3, No. Parts Quantity accessory-4） from the carton and place them on a protected surface or carpet. 1 ○ 1 2 ○ 1 ③ 2 ④ 1 2.Attach the screws (4) to the left/right side facing arm pad. Insert the arm pads (3) with screws to the seat hole directly, then gently pull it to the outside. Make sure the left/right arm pads set leveled.
PAGE 2
3. Attach the back cushion (2) to the seat cushion (1) by sliding the receivers into the mechanism posts located on the seat cushion (1). From the front of the recliner, press down on both sides of the back cushion (2) to firmly secure. The back cushion (2) and seat cushion (1) will automatically lock into place. Then pull the back flap down tightly and attach the back flap to the bottom of the seat cushion (1). Correct side view Correct back view 4.