Technical data

Controls, LEDs, and Connectors
MVME2502 Installation and Use (6806800R96B)
60
3.4.2.4 COP Connector (P6)
The COP header is used for the CPU debug. The pin assignment is dictated by Freescale and is
compatible with the processor’s debugging tool.
49 SCAN 4 TCK 3 50 SCAN 4 TRST
51 SCAN 5 TMS 52 SCAN 5
53 SCAN 5 TDO 54 GND
55 +3.3V 56 SCAN5 TCK2
57 SCAN 5 TDI 58 GND
59 SCAN 5 TRST 60 NC
Table 3-13 JTAG Connector (P6) (continued)
Pin Signal Description Pin Signal Description
Table 3-14 COP Header (P10)
Pin Signal Description
1 JTAG TDI
2 COP QACK
3 JTAG TDO
4 COP TRST
5 COP RUNSTOP (Pulled UP)
6 COP VDD SENSE
7 JTAG TCK
8 COP CHECK STOP IN
9 JTAG TMS
10 NC
11 P2020 SW RESET
12 COP PRESENT
13 COP HARD RESET
14 KEYING