Technical data

Controls, LEDs, and Connectors
MVME2502 Installation and Use (6806800R96B)
59
3.4.2.3 JTAG Connector (P6)
The JTAG Connector can be used in conjunction with the JTAG board and ASSET hardware.
Table 3-13 JTAG Connector (P6)
Pin Signal Description Pin Signal Description
1 NC 2 +3.3V FROM +5V
3 SPI HOLD 0 4 SPI CS 0
5 SPI CLK 6 SPI CS 1
7 SPI HOLD 1 8 SPI MOSI
9 SPI MISO 10 GND
11 SPI VCC 12 SCAN 1 TCK
13 SCAN 1 TDI 14 GND
15 SCAN 1 TRST 16 SCAN 1 TDO
17 SCAN 1 TMS 18 +3.3V
19 GPO0 20 NC
21 NC 22 SCAN 2 TMS
23 NC 24 SCAN 2 TDO
25 SCAN 2 TCK 26 +3.3V FROM +5V
27 GND 28 SCAN 2 TDI
29 NC 30 NC
31 SCAN 3 TMS 32 SCAN 3 TCK1
33 SCAN 3 TDO 34 SCAN 3 TCK 2
35 +2.5V 36 SCAN 3 TCK 3
37 SCAN 3 TDI 38 GND
39 SCAN 3 TRST 40 SCAN 3 TCK3
41 SCAN 4 TCK 1 42 SCAN 4 TMS
43 GND 44 SCAN 4 TDO
45 SCAN 4 TCK 2 46 +3.3V
47 GND 48 SCAN 4 TDI