Technical data

Controls, LEDs, and Connectors

MVME2502 Installation and Use (6806800R96B)

3.4.1.3 USB Connector (J5)

The MVME2502 uses upright USB receptacle mounted in the front panel.

3.4.1.4 VMEBus P1 Connector

The VME P1 connector is a 160-pin DIN. The P1 connector provides power and VME signals for

24-bit address and 16-bit data. The pin assignments for the P1 connector is as follows:

7RTS

8CTS

9NC

Table 3-4 Front Panel Serial Port (J4)

Pin Signal Description

Table 3-5 USB Connector (J5)

Pin Name Signal Description

1 +5 V

2 Data -

3 Data +

4GND

MTG Mounting Ground

Table 3-6 VMEbus P1 Connector

Pin Row A Row B Row C Row D Row Z

1 DATA 0 BBSY DATA 8 +5V NC

2 DATA 1 BCLR DATA 9 GND GND

3 DATA 2 ACFAIL DATA 10 NC NC