Technical data

Controls, LEDs, and Connectors
MVME2502 Installation and Use (6806800R96B)
46
3.3.2 Onboard LEDs
The onboard LEDs are listed below. The LEDs are located on the rear side of the board just
opposite of the battery location. To view the board, see Figure 3-1 on page 41.
Figure 3-5 Onboard LEDs
Table 3-2 Onboard LEDs Status
Label Function Color Description
D9 Power Fail Red This indicator is illuminated when one or more of the on-
board voltage rails fails.
D33 User Defined Amber Controlled by the CPLD. Used for boot-up sequence
indicator.
D34 User Defined Amber Controlled by the CPLD. Used for boot-up sequence
indicator.
D35 User Defined Amber Controlled by the CPLD. Used for boot-up sequence
indicator.
D36 Early Power Fail Amber This indicator is lit when the early 3.3V power supply fails.
D37 User Defined Amber Controlled by the CPLD
D38 User Defined Amber Controlled by the CPLD