Owner`s manual

30
Maintaining Your Spa
Draining Your Spa
Your spa needs to be drained, cleaned, waxed, and refilled about every
six months. More frequent water changes may be necessary if bather
load is heavy. A hose bib has been provided below the left side of your
front access panel, to assist you in draining your spa.
1) Turn off the power to your spa. If
you fail to turn the power off, vital
components could be damaged. Do
not leave an empty spa exposed for
long periods of time in hot, sunny
weather.
2) Attach your garden hose to the hose
bib.
3) Place the other end of the hose in
an area that will accept the water
capacity of your spa.
4) Open the hose bib by turning the valve knob counter-clockwise to
the full stop position.
5) Check the garden hose end to see if water is flowing. If water is not
flowing, check the hose for kinks. Also check to see if valve is in the full
open position.
CAUTION: The chemical content and temperature of the water will
cause damage to certain vegetation. We do not recommend that
you drain your spa onto plants or lawns. If you choose to do this,
please remove your spa cover and allow spa to cool for a minimum
of 24 hours with the spa turned off.
Pillow Care
Remove and clean the pillows with soapy water and a soft cloth when
needed. Use a vinyl conditioner once a month. Remove pillows when
doing chemical shock treatment.
Valve Knob
Hose Bib
31
Jet Care
We recommend that you clean your jets when you drain your spa.
1) Spray jet inserts with a
mixture of 1 part vinegar to
two parts warm water and let
soak for 10 - 15 minutes. Pe-
riodically rotate the spinner
nozzle to break up residue in
the jets.
2) Rinse the jet inserts with
a standard garden hose