Owner`s manual

ML700 Quick Reference Guide

During this time, a press of the “Mode/Prog” button

will revert to Economy Mode immediately.

Sleep Mode heats the spa to within 20 degrees F (11degrees C)

of the set temperature only during filter cycles, the “Sleep” icon will

display until mode is changed.

Standby Mode

Pressing “Warm” or “Cool” then “Jets2”

will turn off all spa functions temporarily. This is helpful when chang-

ing a filter. Pressing any button resets the spa.

Locking the Panel

Press “Time” “Jets1” then “Warm” within 3

seconds. When locked, the PL light will light.

All buttons are frozen except the “Time” button. To unlock

the panel, press “Time” “Jets 1” then “Cool.”

Locking the Set Temperature

Press “Warm” or “Cool” then “Time,” “Jets1”

and “Warm” within 3 seconds to activate the lock.

The TL “light will light when the set temperature is locked.

To unlock the set temperature, press “Warm” or “Cool”

then “Time”, “Jets1” and “Cool”.

Additional Features

Refer to your User Guide for additional details and features tha

are available with your ML700 panel and EL/GL Series system.

*Spa equipped w/pulsating wave option

ML700 Quick Reference Guide

Setting the Time

Once the spa has been properly connected the first time (every

power up on the EL1000 and some EL2000 systems), notice the

“Time” icon appearing on the screen.

This button is used to switch between standard, economy, and

sleep modes, press “Mode/Prog”

to enter mode programmming, press “Cool”

to cycle through to desired mode (LCD flashes until confirmed)

then press “Mode/Prog” to confirm selection.

Standard Mode maintains the desired temperature Note that the

last measured spa temperature displayed is current only when the

pump has been running for at least 1 minute, the “STANDARD” icon

will display until the mode is changed.

Economy Mode heats the spa to set temperature only during fil-

ter cycles. The “ECONOMY” icon will display until mode is changed.

Pressing “jets1” while in economy mode puts the spa in Standard

-In-Economy mode, which operates the same as Standard mod,

then reverts to economy Mode automatically after 1 hour. Both the

“Standard” and Economy” icons display in this mode.