TABLE OF CONTENTS Congratulations......................................................................... 1 Safety Warnings......................................................................... 4 Spa Configuration and Water Capacities................................ 7 Electrical Requirements and Installation................................ 41 Electrical Wiring.............................................................. 41 Spa Start Up.....................................................................
Congratulations... Congratulations on the purchase of your new Island spa by Owning a spa brings some responsibility. With proper care, your Artesian. We know you will enjoy your spa. Although spas are spa will provide years of enjoyment and therapy for your family relaxing and fun, we believe they can be an indispensable part and friends. Please take time to read and understand all of the of a healthy lifestyle.
For your future reference and convenience, please record the Serial and Model number along with the installation date in the spaces provided below. STORE THIS MANUAL WHERE YOU CAN EASILY FIND IT WHEN NEEDED. The serial and model numbers are mounted on the base of the equipment enclosure area, as shown below.
SAFETY WARNINGS cont... WARNING: Do not use drugs or alcohol before or during the use of a spa or hot tub to avoid unconsciousness and possible drowning. WARNING: Drugs, alcohol, and some medications greatly increase the risk of fatal hyperthermia. WARNING: Before entering the spa or hot tub, measure the water temperature with an accurate thermometer. Water temperatures above 100 degrees F (38 celsius) may be injurious to the health of some.
LINE DRAWING KEY Name of Component SPA CONFIGURATION AND WATER CAPACITIES Symbol for Component Poly Roto-Wave (LG) Poly Roto-Wave Poly Directional-Wave Non-Adjustable Whirlpool / Adjustable Whirlpool Non-Adjustable Euro Mini Storm Directional-Wave Master Massage Mini Multi-Massage-Wave Ozone / Drain Jet Storm Direct Gray BIMINI 72 jet LED Air Control Diverter Controls Filter Well and Filters Speakers Volume Weight Dimensions Control Pump 1 Pump 2 Pump 3 Heater Filter 580 Gallons dry / 1100 lbs filled /
SPA CONFIGURATION AND WATER CAPACITIES GRAND BAHAMA 62 jet Volume Weight Dimensions Control Pump 1 Pump 2 Pump 3 Heater Filter 9 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.0 HP 1 SPD 230V 56F 3.0 HP 1SPD 230V Power WOW 5.5 KW Flo Thru Disposable Micro-Filter / 50 sq. ft. GRAND BAHAMA 52 jet 3 pump Volume Weight Dimensions Control Pump 1 Pump 2 Pump 3 Heater Filter 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.
SPA CONFIGURATION AND WATER CAPACITIES GRAND BAHAMA 52 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 11 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.0 HP 1 SPD 230V 56F 5.5 KW Flo Thru Disposable Micro-Filter / 50 sq.ft GRAND BAHAMA 42 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 4.8 HP 2 SPD 230V 56F 4.8 HP 1 SPD 230V 56F 5.
SPA CONFIGURATION AND WATER CAPACITIES GRAND BAHAMA 32 jet 2 pump Volume Weight Dimensions Control Pump 1 Pump 2 Circulation Heater Filter 13 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 3.0 HP 1SPD 230V Power WOW 3.0 HP 1SPD 230V Power WOW 24 hr. circ system 4.1 KW Laing Disposable Micro-Filter / 50 sq. ft. GRAND BAHAMA 32 jet Volume Weight Dimensions Control Pump 1 Heater Filter 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2SPD 230V 56F 5.
SPA CONFIGURATION AND WATER CAPACITIES GRAND CAYMAN 62 jet Volume Weight Dimensions Control Pump 1 Pump 2 Pump 3 Heater Filter 15 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.0 HP 1 SPD 230V 56F 3.0 HP 1SPD 230V Power WOW 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. GRAND CAYMAN 52 jet 3 pump Volume Weight Dimensions Control Pump 1 Pump 2 Pump 3 Heater Filter 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.
SPA CONFIGURATION AND WATER CAPACITIES GRAND CAYMAN 52 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 17 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.0 HP 1 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. GRAND CAYMAN 42 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 4.8 HP 2 SPD 230V 56F 4.8 HP 1 SPD 230V 56F 5.
SPA CONFIGURATION AND WATER CAPACITIES GRAND CAYMAN 32 jet 2 pump Volume Weight Dimensions Control Pump 1 Pump 2 Circulation Heater Filter 19 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 3.0 HP 1 SPD 230V 56F 3.0 HP 1 SPD 230V 56F 24 hr. circ system 4.1 KW Laing Disposable Micro-Filter / 50 sq. ft. GRAND CAYMAN 32 jet Volume Weight Dimensions Control Pump 1 Heater Filter 330 Gallons dry / 783 lbs filled / 4121 lbs 91”x91”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 5.
SPA CONFIGURATION AND WATER CAPACITIES CAPTIVA 52 jet 3 pump Volume Weight Dimensions Control Pump 1 Pump 2 Pump 3 Heater Filter 21 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.0 HP 1 SPD 230V 56F 3.0 HP 1SPD 230V Power WOW 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. CAPTIVA 52 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.
SPA CONFIGURATION AND WATER CAPACITIES CAPTIVA 42 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 23 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 4.8 HP 2 SPD 230V 56F 4.8 HP 1 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. CAPTIVA 32 jet 2 pump Volume Weight Dimensions Control Pump 1 Pump 2 Circulation Heater Filter 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 3.0 HP 1SPD 230V Power WOW 3.0 HP 1SPD 230V Power WOW 24 hr.
SPA CONFIGURATION AND WATER CAPACITIES CAPTIVA 22 jet CAPTIVA 32 jet Volume Weight Dimensions Control Pump 1 Heater Cartridge Filter 25 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 6.0 HP 2SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter Volume Weight Dimensions Control Pump 1 Heater Filter 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 4.8 HP 2SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft.
SPA CONFIGURATION AND WATER CAPACITIES ANTIGUA 52 jet 3 pump Volume Weight Dimensions Control Pump 1 Pump 2 Pump 3 Heater Filter 27 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.0 HP 1 SPD 230V 56F 3.0 HP 1SPD 230V Power WOW 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. ANTIGUA 52 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.
SPA CONFIGURATION AND WATER CAPACITIES ANTIGUA 42 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 29 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 4.8 HP 2 SPD 230V 56F 4.8 HP 1 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. ANTIGUA 32 jet Volume Weight Dimensions Control Pump 1 Heater Filter 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft.
SPA CONFIGURATION AND WATER CAPACITIES ANTIGUA 32 jet 2 pump Volume Weight Dimensions Control Pump 1 Pump 2 Circulation Heater Filter 31 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 3.0 HP 230V POWER WOW 1 SPD 3.0 HP 230V POWER WOW 1 SPD 24 hr. circ system 4.1 KW Laing Disposable Micro-Filter / 50 sq. ft. ANTIGUA 22 jet Volume Weight Dimensions Control Pump 1 Heater Filter 330 Gallons dry / 551 lbs filled / 3263 lbs 82”x82”x36” LCD S-CLASS 4.8 HP 2SPD 230V 56F 5.
SPA CONFIGURATION AND WATER CAPACITIES SABA 46 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 33 330 Gallons dry / 501 lbs filled / 2586 lbs 72”x82”x35” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 6.0 HP 1 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. SABA 38 jet Volume Weight Dimensions Control Pump 1 Pump 2 Heater Filter 330 Gallons dry / 501 lbs filled / 2586 lbs 72”x82”x35” LCD S-CLASS 4.8 HP 2 SPD 230V 56F 4.8 HP 1 SPD 230V 56F 5.
SPA CONFIGURATION AND WATER CAPACITIES SABA 29 jet Volume Weight Dimensions Control Pump 1 Heater Filter 35 330 Gallons dry / 501 lbs filled / 2586 lbs 72”x82”x35” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq ft SABA 29 jet 2 pump Volume Weight Dimensions Control Pump 1 Pump 2 Circulation Heater Filter 330 Gallons dry / 501 lbs filled / 2586 lbs 72”x82”x35” LCD S-CLASS 4.8 HP 1 SPD 230V 56F 3.0 HP 1 SPD 230V POWER WOW 24 hr. circ system 4.
SPA CONFIGURATION AND WATER CAPACITIES SANTA CRUZ 30 jet Volume Weight Dimensions Control Pump 1 Heater Filter 37 330 Gallons dry / 441 lbs filled / 1943 lbs 82”x60”x32” LCD S-CLASS 6.0 HP 2 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. SANTA CRUZ 30 jet 2 pump Volume Weight Dimensions Control Pump 1 Pump 2 Circulation Heater Filter 330 Gallons dry / 441 lbs filled / 1943 lbs 82”x60”x32” LCD S-CLASS 3.0 HP 1 SPD 230V POWER WOW 3.0 HP 1 SPD 230V POWER WOW 24 hr circ. system 4.
SPA CONFIGURATION AND WATER CAPACITIES SANTA CRUZ 18 jet Volume Weight Dimensions Control Pump 1 Heater Filter 39 330 Gallons dry / 441 lbs filled / 1943 lbs 82”x60”x32” LCD S-CLASS 4.8 HP 2 SPD 230V 56F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft. SANTA CRUZ 13 jet Volume Weight Dimensions Control Pump 1 Heater Filter 330 Gallons dry / 441 lbs filled / 1943 lbs 82”x60”x32” K-19 S-CLASS 3.0 HP 2 SPD 110V 48F 5.5 KW FLO THRU Disposable Micro-Filter / 50 sq. ft.
ELECTRICAL REQUIREMENTS AND INSTALLATION MUST BE DONE BY A CERTIFIED ELECTRICIAN Important Connections Neutral of GFCI must be connected to neutral bus. The following information is provided for hooking up electrical supply to your new spa. A qualified, licensed, electrician must perform this work. Failure to follow these instructions will terminate all warranty coverage and can cause serious injury or death. Neutral from spa must be connected to breaker.
SPA START-UP Please read each step of the start up section prior to doing the step. SELECTING A LOCATION 7) Have the spa deck installed by a knowledgeable contractor to en sure proper support. 8). If the spa is placed on the ground, even for a short period of time, it must be supported by stones that are at least 2 inches thick and 12 inches square. A solid foundation is recommended as soon as possible.
SPA START-UP cont... TURNING THE POWER ON FILLING THE SPA WITH WATER cont... Turn the power to the spa on at the main circuit breaker. Verify that your spa has no error codes. (See page 47) Verify you have good circulation in your spa. Your pumps will come on in cycles, for 1 minute each cycle. 4) Fill the tub from the circulation pump line until water level is above the foot-well. Note: This will purge all the air out of your circulation pump.
SPA START-UP cont... TESTING THE GFCI BREAKER cont... NOTE: When power is turned on, your spa is automatically programmed to start circulating water through the circulation pump. Each pump and/or blower will come on consecutively for approximately 1 minute to automatically purge the system. Adjust your temperature by pressing the up button on your touchpad until the desired temperature is displayed. This setting will allow your spa to heat to the set temperature.
KEYS AND FUNCTION Display Icon Diagram PUMP KEYS Up Key Filter Key Light Key Pump 1 Key 1) To activate Pump 1 press the Pump 1 key. When Pump 1 is running in low speed, you will see the Pump 1 icon blinking in the display. The second push on Pump 1 will turn Pump 1 to high speed. When the pump is in high speed the pump 1 icon will remain solid. A third push of the Pump 1 key will turn Pump 1 off.
KEYS AND FUNCTION cont... ECONOMY KEY LIGHT KEY Press the ECONOMY key to turn economy mode on. Press the ECONOMY key a second time to turn economy mode off. When the spa is set to economy mode the icon is on solid. Pressing the LIGHT Key once will turn the light on full intensity. The Light Icon is displayed. Pressing the LIGHT Key a second time will turn the light off. NOTE: A built in timer automatically turns the light off after 2 hours unless light has been manually deactivated.
KEYS AND FUNCTION cont... POWER-UP DETECTION FILTER CYCLE cont... After a power-up, the display will blink until a key on the control panel is pressed. This feature is to let the user know that a power failure has occurred. prevents excessive water temperatures due to a long filtration during warm temperatures. The filter logo will blink for the remainder of the filter cycle.
MAINTAINING YOUR SPA JET CARE DRAINING YOUR SPA We recommended that you clean your jets when you drain your spa. However, if you do need to clean your jets in between this can be accomplished with a full spa. Your spa needs to be drained, cleaned, waxed, and refilled about every six months. More frequent water changes may be necessary if bather load is heavy. A hose bib has been provided below the left side of your front access panel, to assist you in draining your spa. 1) Turn off the power to your spa.
MAINTAINING YOUR SPA cont... WINTERIZING YOUR SPA REMOVING, INSTALLING AND CLEANING FILTERS You should replace your disposable spa filters every four months. These are the steps needed to successfully replace your filters. It is not recommended that you drain your spa completely during freezing conditions. We recommend that you leave your spa full of water with the power on to keep the tub from freezing. If you decide to drain your spa during freezing conditions, contact your dealer for help.
MAINTAINING YOUR SPA cont... SPA CABINET CARE The wood cabinet of your spa is stained and sealed with an oil-based acrylic stain. The stain is formulated especially for spa cabinet and deck applications and is resistant to ultraviolet light damage caused by sun rays. It is also resistant to fungus and insect damage. Your Artesian dealer carries this type of stain for your convenience, so call your dealer when you’re ready to re-stain your cabinet.
MAINTAINING YOUR SPA cont... WATER CHEMISTRY CHEMICAL TREATMENT OF WATER CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. Always follow these basic guidelines when handling the chemicals: Water from your tap is fine for showers, bathing and drinking. However, in a contained recirculating system such as in a spa, water must be treated with chemicals.
WATER CHEMISTRY cont... WATER TREATMENT GLOSSARY cont... be rapid sanitizer loss, eye and skin irritation, expedited corrosion of metals, as well as staining throughout the spa. High PH can result in cloudy water, low sanitizer efficiency, as well as eye and skin irritation. 3 - Parts per Million (PPM): The term “parts per million” will be used frequently in the world of water care. The term simply means exactly what it says: the coexistence of any one unlike item with a larger number of “like” items.
WATER CHEMISTRY cont... WATER TREATMENT GLOSSARY cont... 17 - Chloramines: Irritating, odorous forms of combined chlorine, formed by the reaction of chlorine with nitrogen containing waste products. Ineffective as a pool or spa sanitizer. High levels of chloramines can cause the problems of “Red Eyes” or “Stinging Eyes.” Usually requires a shock treatment to lower or destroy the combined chlorine level.
WATER CHEMISTRY cont... WATER TREATMENT GLOSSARY cont... ness. Such water can prove to be corrosive to masonry surfaces and underwater metal parts. The calcium hardness level can be raised, to the optimum range of 150-200 PPM, by the addition of appropriate amounts of a calcium hardness increaser (calcium chloride). SPA CHEMICALS GLOSSARY 1 - Alkalinity Up: The total alkalinity of your spa water should be between 80-140 PPM. A proper alkalinity will help buffer your spa water against sudden changes in pH.
WATER CHEMISTRY cont... MAINTAINING THE PROPER PH BALANCE The pH factor is a measure of the relative acidity or alkalinity in the water. It is measured on a scale of 1 to 14. Pure water has a value of 7, which is neutral. Any value above 7 is alkaline, and any value below 7 is acidic. You should maintain a slightly alkaline pH level, between 7.2 and 7.8, in the hydrotherapy spa. Severe problems can occur when the pH balance is not maintained within this range. If the pH level exceeds 7.
TROUBLESHOOTING cont... Error The heater is turned off during an FLC error. The controller is always checking the current state of the pressure switch. When the Pump 1 is not running, the switch must be open. If not, an FLC error occurs. While the pump is running, an FLC error, which was present before pump activation, is removed only if an FLO error occurs. If an FLO error occurs or if the pump is not running, an FLC error is removed when the switch opens.
WARRANTY This section is a description of your warranty. Here you will find descriptions of what is covered under your Island Spa by Artesian warranty and what can void your warranty. Lifetime Shell Warranty May Maunfacturing, Inc. warrants the spa against loss of water due to a defect in the shell to the original owner for the life of the spa shell. In the event of a defect in the material and/or workmanship, the spa shell will be repaired or replaced at the option of the manufacturer.
WARRANTY cont... to 110 degrees F, damage caused by clogged or dirty filter cartridges, damage to the spa from the absence of a hard cover, damage to the components from improper pH, use of any type of acid, or from chemical imbalance. Damaged caused by natural disasters such as tornados and are not covered under this warranty. Disclaimer: May Manufacturing, Inc.
INTERIOR SPA DIAGRAM 1) Spa Pack 2) Heater 3) Therapy Pump 4) 24-hr Circulation pump 5) Flow Switch 77 78
Please do not send products or other correspondence to the address below. __________________________ __________________________ __________________________ ARTESIAN SPAS Attn: Customer Care Department 4720 N. Lamb Blvd.
Ms.
