User Manual

Layer Mode

In Layer mode two voices may be played simultaneously, each at individual

selected volume levels.

To enter the Layer mode, press and hold the voice select button to select the

MAIN sound, then press the another voice select button that you would like to

add for the LAYER sound, and release. Both the buttons LED will remain on

while layered.

To layer two sounds in different banks, press and hold simultaneously the voice

button required in the first bank and the bank button. The bank button LED will

flash and the first voice button will be lit. Once the bank button is flashing you

can remove your hands from the buttons. Next, select the layered button from

the second bank by pressing the corresponding button. Once selected this

button will blink to indicate it is from the second bank while the instrument from

the first bank stays lit. If two voices in the first and second bank, but on the

same button are selected, the buttons should merely blink. These can also be

layered by double-pressing the button in which case again the button will blink.

FUNCTION

TEMPOMETRONOME

To Adjust the Volume of Main Voice in Layer Mode

Press the [METRONOME] and the [TEMPO] buttons together to enter Edit Mode

The LEDs for both buttons will become lit.

，

To turn Layer Mode off, select a single voice button and the other Voice LED light

will turn off.

PIANO 1

E.PIANO 1

ORGAN

CLAVINET

VIBES

NYLON GTR

STRINGS

E.PIANO 2

CHURCH ORGAN

HARPSICHORD

HARP

STEEL GTR

PIANO 2

CHOIR

FANTASIA

E.BASS

BANK