User Manual

9
Reverb and Chorus Buttons
To apply either effect, press either button. The button will light and the
effect will be heard when the piano is played.
To turn off the effect, press the button of the desired effect again and the
LED light will turn off.
REVERB
3. Set the reverb depth by pressing a key on the keyboard to select the value.
See the Appendix for the Reverb Depth on pages 24 to 31.
C4 C5 C6 C7C3
The Reverb and Chorus effects may be applied to each voice individually
and will be retained even when the power is turned off.
CHORUS
Select the Depth of the Effects
1. Press and hold the effect button that you want change the depth of.
REVERB
CHORUS
2. The LED will blink. You can then release the button and press a key on the
keyboard corresponding to the setting you want for the reverb depth. It's
possible to change the setting by pressing multiple keys after each other
until the right setting is found.