User Manual

① Check the Wi-Fi name you want to connect to
② Enter Wi-Fi password
③ Send Wi-Fi information to the navigation system (just click once,
don't click repeatedly)
④ Observe connection status
⑤ Show IP for connection success (show 127.0.0.1 for connection
failure)
3. The scanning device should be connected to the same LAN as the
machine. Open the browser and input the IP address of the machine
(Chrome browser is recommended)
Note: if the connection to Wi-Fi fails, you can turn off the app and try
again; if it still fails, you can power off the robot and restart it and try
again
The step 2 [ build a map ]
 The viewing angle of the Lidar is 230°, and the scanning range is the
horizontal plane of the radar height; the scanning distance is 20
meters
 Ask people to stand behind to push the robot, or use the keyboard
arrow keys to control the mapping