User manual

Arteluthe Satie Active
User Manual
Version 1.1
Drive Units
Low Frequency Driver
6 in. Damped co-polymer, 3 in. voice coil, cast basket, Ferrite
magnet
High Frequency Driver
1 in. silk unit, Ferrite magnet
Enclosure tuning
AirForce acoustic horn hybrid, proprietary design
Frequency response
50 Hz to 20 000 Hz @ 0 dB, flat preset
Typical, in room response
40 Hz to 20 000 Hz @ - 3 dB, flat preset
Horizontal dispersion
Over 30 degrees
Vertical dispesion
15 degrees below axis
System Specifications
Amplifier / DSP
Low Frequency
150 watts continuous into 4 Ω
High Frequency
75 watts continuous into 4 Ω
Low Frequencies LowPass
2 000 Hz, 48 dB per octave, Linkwitz-Riley
High Frequencies High Pass
2 000 Hz, 48 dB per octave, Linkwitz-Riley
DSP Preset 1
Flat
DSP Preset 2
Vivid
DSP Preset 3
Low boost
DSP Preset 4
Low cut / subwoofer integration
Amplifiers
Input impedance
10 kΩ Balanced to ground
Gain
32dB" (voltage gain: x40)
Frequency response
3 Hz - 45 kHz (-3dB) for 1W @ 8" Ω
S/N ratio
> 113 dB(A) (20 Hz - 20K Hz)
Crosstalk separation
>70 dB @ 1 kHz
Slew rate
30 V/µs @ 8 Ω. input filter bypassed
Damping factor
> 1000 @ 100 Hz
THD+N
< 0,005 %"" from 0,1W to full power
SMPTE IMD
< 0,005% from 0,1W to full power
DIM100 IMD
< 0,001% from 0,1W to full power
Output type
Unbalanced to ground
Max Output Voltage" (peak)
53 V