User Manual

Light Tower
22
Operating Your Light Tower
⑤
Install the software from the URL below to setup
the Studuino Programming Environment.
★ Proceed to Step 1 when software installation is complete.
Open the downloaded file.
http://www.artec-kk.co.jp/studuino/
Download the program file LightTower.ipd from the URL
below in the ArtecRobo section.
②
Connect the USB cable to the PC and the Studuino unit.
Refer to 1.3. About Studuino in the Studuino Programming Environment Manual for more details.
①
Remove the USB cable from the Studuino unit.
http://www.artec-kk.co.jp/artecrobo/
③
④
Transfer the program to
the Studuino unit by clicking
the Transfer button .