User Manual

Line Tracer
14
On the last page of the instructions there is an A4 size printout of a run course for
your robot.
⑥
If you cannot print out the course, you can draw your own. Draw the lines of the
run course using a thick, black marker and white paper.
The thickness of the lines should be 20 mm or more.
Your robot cannot make sharp turns.
★ Your Line Tracer may have trouble detecting a course printed on glossy paper or using an inkjet printer.
If your robot is having trouble, try reprinting your course on non-glossy paper or retracing the course using a magic marker!
Turn the switch of the battery box on and your robot will start walking.
⑧
Place the robot onto the course where the left and right reflective infrared sensor
can detect the course line.
⑦
Making Your Line Tracer Run