User Manual

Turn Robot
Operating Your Turn Robot
14
Turn the switch of the battery box on.
⑥
Your robot will use its touch sensor when it bumps into a wall or object.
It will move back a little and move around the object.
⑦
http://www.artec-kk.co.jp/artecrobo/
Remove the USB cable from the Studuino unit.
Open the downloaded file.
Download the program file TurnRobot.ipd from the URL below in the ArtecRobo
section.
②
Connect the USB cable to the PC and the Studuino unit.
Refer to 1.3. About Studuino in the Studuino Programming Environment Manual for more details.
①
⑤
③
Install the software from the URL below to setup
the Studuino Programming Environment.
http://www.artec-kk.co.jp/studuino/
★ Proceed to Step 1 when software installation is complete.
Transfer the program to
the Studuino unit by clicking
the Transfer button .
④