User Manual

Making Your Transporter Run
17
Transporter
On the last page of the instructions there is an A4 size printout of a run course for
your robot.
⑥
If you cannot print out the course, you can draw your own. Draw the lines of the
run course using a thick, black marker and white paper.
The thickness of the lines should be between 5 mm and 10 mm.
Your robot cannot make sharp turns.
Turn the switch on the battery box to ON.
⑧
When the touch sensor is on, the robot will detect objects placed in its arms and
run along the track.
⑨
Place the robot onto the course where the left and right reflective infrared sensor
can detect the course line.
⑦