User Manual

Transforming Robot
29
下半身の完成
Making Your Robot Walk
①
Transfer TransformingRobot_2.ipd to your Studuino.
See page 19 of this guide for instructions on how to transfer data.
②
Turn the switch of the battery box on and your robot will start walking.
Immediately turn the switch to off if your robot does not begin walking as
shown in the picture below.
Not doing so may damage the servomotor.
If your robot does not move, the servomotor may be in the wrong position or
the blocks may be improperly connected.
Re-read the Assembly Instructions to make sure that your robot has been
assembled correctly.
Left
Right
Front
Back