User Manual

http://www.artec-kk.co.jp/artecrobo/
26
Four-legged Dancing Robot
Operating Your Four-legged Dancing Robot (Dancing)
Install the software from the URL below to setup
the Studuino Programming Environment.
★Proceed to Step 1 if the software on page 24 is already installed.
Remove the USB cable
from the Studuino unit.
Open the downloaded file.
Transfer the program to the
Studuino unit by clicking the
Transfer button.
http://www.artec-kk.co.jp/studuino/
Use the Block Programming Environment to make your robot dance to a melody.
Download the program file Four_leggedDancingRobot_2.bpd from the URL
below in the ArtecRobo section.
②
Connect the USB cable to the PC and the Studuino unit.
Refer to 1.3. About Studuino in Studuino Programming Environment Manual for more details.
①
⑤
③
④
Turn the switch of the
battery box on and your
robot will start walking.
⑥
Your robot will dance to the melody.
⑦