User Manual

Operating Your Biped Walking Robot
29
Biped Walking Robot
Immediately turn the switch to off if your robot does not begin walking as
shown in the picture below.
Not doing so may damage the servomotor.
If your robot does not move, the servomotor may be in the wrong position or
the blocks may be improperly connected. Re-read the Assembly Instructions
to make sure that your robot has been assembled correctly.
⑥
⑦
Turn the switch of the battery box on and your robot will start walking.
After the last movement of your robot (raises right hand), your robot will start
walking when it detects a sound.