ARTDio Intelligence Communication IPS-3101h User Manual V1.
User’s Manaul Table of Contents 1. Welcome…………………………………………………………………………………...3 2. Installation ………………………………………………………………………………..4 3. What is Included in the ckage………………………………………………………….5 3.1 Safety Compliances……………………………………………………………………….5 4. Product Overview ………………………………………………………………………..6 4.1 Key Features……………………………………………………………………………….6 4.2 Hardware Specification……………………………………………………………………7 5. Basic Operations………………………………………………………………………….8 5.1 Get Familiar with Key Pad and Voice Prompt…………………………………….........
User’s Manaul 1. Welcome Congratulations on becoming an owner of IPS-3101h. You made an excellent choice and we hope you will enjoy all its capabilities. ArtDio's award-wining IPS-3101h is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultraaffordability. The IPS-3101h is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market.
User’s Manaul Installation IPS-3101h VoIP Gateway is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The IPS-3101h VoIP functionalities are available via a regular analog telephone. The following photo illustrates the appearance of a IPS-3101h.
User’s Manaul What is Included in the Package The IPS-3101h package contains: 1) 2) 3) 4) 5) One IPS-3101h One universal power adaptor One Ethernet cable One CD-ROM Quick Install Guide 2.1 Safety Compliances The IPS-3101h is compliant with various safety standards including FCC/CE. Its power adaptor is compliant with UL standard. The IPS-3101h should only operate with the universal power adaptor provided in the package. Warning: Please do not attempt to use a different power adaptor.
User’s Manaul Product Overview 2.2 Key Features • Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc. • Built-in router, NAT, Gateway and DMZ port forwarding • Powerful digital signal processing (DSP) to ensure superb audio quality; advanced adaptive jitter control and packet loss concealment technology • Support various codec including G.711 (alaw and u-law), G.723.1 (5.3K/6.3K), G.
User’s Manaul 2.3 Hardware Specification The table below describes the difference among these models. Model IPS-3101h LAN interface WAN interface FXS telephone port PSTN port Button LED 1xRJ45 10Base-T 1xRJ45 10Base-T 1xFXS 1x life line port 1 Green and red color Input: 100-240VAC 50-60 Hz Output: +5VDC, 1200mA, UL certified 70mm (W) 130mm (D) 27mm (H) 0.6lbs (0.
User’s Manaul Basic Operations 2.4 Get Familiar with Key Pad and Voice Prompt IPS-3101h has stored a voice prompt menu for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button or “***” from the analog phone.
User’s Manaul 2.5 Make Phone Calls 2.5.1 Calling phone or extension numbers There are currently two methods to make a extension number call: a) Dial the numbers number directly and wait for 4 (default) seconds. b) Dial the numbers directly, and press # (assuming that “use #” as dial key is selected in web configuration). Other functions available during the call are call-waiting/flash, call-transfer, and callforwarding. 2.5.
User’s Manaul 09 *0 *4 9 . (dot character) : (column character) Examples: If the target IP address is 192.168.0.160, the dialing convention is Voice Prompt with option 47, then 192168000160 followed by pressing the “#” key if it is configured as a send key or wait for more than 5 seconds. In this case, the default destination port 5060 is used if no port is specified. If the target IP address/port is 192.168.1.
User’s Manaul Flash/Hook then hang up When in conversation, this action will switch to the new incoming call if user heard the call waiting sound. When in conversation and no incoming call heard, this action will switch to a new channel for a new call. 2.6.2 PSTN Pass Through When IPS-3101h is out of power, the RJ 11 line jack on the IPS-3101h side will function as a pass through jack, user will be able to use the same analog phone for PSTN calls. 2.
User’s Manaul Configuration Guide 2.8 Configuring IPS-3101h WAN IP through Voice Prompt 2.8.1 DHCP Mode Follow section 5.1 with voice menu option 01 to enable IPS-3101h to use DHCP. 2.8.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable IPS-3101h to use STATIC IP mode, then use option 02, 03, 04 to set up VoIP gateway’s IP, Subnet Mask, Gateway respectively. 2.
User’s Manaul The password is case sensitive and the factory default password is lower case ‘admin’. 2.9.2 Configuration Menu After the correct password is entered in the login screen, the embedded Web server inside the IPS-3101h will respond with the Configuration Menu screen which is explained in details below.
User’s Manaul ArtDio IPS-3101h Configuration MAC Address: 00.0B.82.00.XX.XX Product Model: IPS-3101h Program--1.0.X.X Bootloader—1.0.0.XX HTML--1.0.0.XX VOC-Software Version: 1.0.0.5 Admin Password: WAN IP Address: ***** (password to configure this IP phone) dynamically assigned via DHCP (default) or PPPoE (will attempt PPPoE if DHCP fails and following is non-blank) PPPoE account ID: PPPoE password: 0 Use this DNS server (if specified): statically IP Address: SIP Server: Outbound Proxy: 0 . .
User’s Manaul Admin Password This contains the password to access the Web Configuration Menu. This field is case sensitive. WAN IP Address There are 2 modes under which the IPS-3101h can operate: - If DHCP mode is enabled, then all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The IPS-3101h will acquire its IP address from the first DHCP server it discovers from the LAN it is connected to.
User’s Manaul Advanced Options: Advanced Options: Preferred Vocoder: choice 1: (in listed order) choice 2: choice 3: choice 4: choice 5: choice 6: choice 7: choice 8: G723 rate: 6.3kbps encoding rate iLBC frame size: iLBC payload type: 20ms 98 Silence Suppression: Layer 3 QoS: 30ms (between 96 and 127, default is 98) No Yes 2 Voice Frames per TX: (up to 10/20/32/64 for G711/G726/G723/other codecs respectively) 48 (Diff-Serv or Precedence value) Layer 2 QoS: 802.
User’s Manaul No Key Entry Timeout: Use # as Dial Key: local SIP port: Local RTP port: Use random port: NAT Traversal: 4 (in seconds, default is 4 seconds) No 5060 Yes (if set to Yes, "#" will function as the "(Re-)Dial" key) (default 5060) 5004 (1024-65535, default 5004) No Yes No Yes, STUN server is: keep-alive interval: 20 (URI or IP:port) (in seconds, default 20 seconds) Use NAT IP TFTP Server: SUBSCRIBE for MWI: (if specified, this IP address is used in SIP/SDP message) 67 . 153 .
User’s Manaul Preferred Vocoder The BudgeTone IPS-3101h supports up to 6 different vocoder types including G.711 A-/U-law,G.723.1, G.726, G.728, G.729A/B, iLBC. Depending on the product model, some of these vocoders may not be provided in standard release. A user can configure vocoders in a preference list that will be included with the same preference order in SDP message. The first vocoder in this list can be entered by choosing the appropriate option in “Choice 1”.
User’s Manaul Use DNS SRV: Default is No. If set to Yes the User ID is Phone Number If the IPS-3101h has an assigned PSTN telephone number, then this field will be set to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone” parameter will be attached to the “From” header in SIP request SIP Registration This parameter controls whether the IPS-3101h needs to send REGISTER messages to the proxy server. The default setting is “Yes”. Unregister on Reboot Default is No.
User’s Manaul NAT Traversal This parameter defines whether the IPS-3101h NAT traversal mechanism will be activated or not. If activated (by choosing “Yes”) and a STUN server is also specified, then the IPS-3101h will behave according to the STUN client specification. Under this mode, the embedded STUN client inside the IPS-3101h will attempt to detect if and what type of firewall/NAT it is behind through communication with the specified STUN server.
User’s Manaul Send Flash Event This parameter allows the user to control whether to send an SIP NOTIFY message indicating the Flash event, or just to switch to the voice channel when the user presses the Flash key. FXS Impedance Selects the impedance of the analog telephone connected to the Phone port. NTP server This parameter defines the URI or IP address of the NTP server which the IPS-3101h will use to display the current date/time.
User’s Manaul NAT/DHCP Server Configuration: NAT/DHCP Server Information & Configuration: WAN IP Address: 192.168.XX.XX Cloned WAN (in hex format) MAC Addr: LAN Subnet (default is 255.255.255.0) Mask: LAN DHCP Base (base IP for the LAN port, default is 192.168.2.
User’s Manaul Port Forwarding: Allow the user to forward a matching (TCP/UDP) port to a specific LAN IP address with a specific (TCP/UDP) port. 2.9.3 Saving the Configuration Changes Once a change is made, the user should press the “Update” button in the Configuration Menu. The IPS-3101h will then display the following screen to confirm that the changes have been saved. ArtDio IPS-3101h Configuration Update Status Your configuration changes have been saved. They will take effect on next reboot.
User’s Manaul Software Upgrade 2.11 Upgrade with TFTP To upgrade software, IPS-3101hs can be configured with a TFTP server where the new code image is located. The TFTP upgrade can work in either static IP or DHCP mode using private or public IP address. It is recommended that the TFTP server must have either public IP address or be on the same LAN with the IPS-3101h.
User’s Manaul Restore Factory Default Setting Warning: Restore the Factory Default Setting will delete all configuration information of the device. Step 1. Find the Mac Address of the device. The Mac address of the device is located on the bottom of the device. It is a 12 digits number. Step 2. Encode the Mac address. The encode rule is: “2” is the first letter on the button “2” so its encoding is “2”. “A” is the second letter on button “2” so its encoding is “22”.