Instructions / Assembly

AC10891VB Wall Light
1. Fix the crossbar to the light box on the wall.
2. Connect all three wires (L,N,G) from the fixture to the corresponding wires from the wall.
3. Fix the mounting plate to the wall with the supplied nutcaps.
4. Untighten the nut directly above the round disc to lower the socket assembly from the steel ring.
5. Lower the socket assembly and separate the two metal disc (top disc without notch, lower disc with a notch)
6. Install the light bulb.
7. slide the edge of the glass opening through the notch of the lower disc and twist the glass until the whole disc is inside the glass.
8. Push up the glass against the top disc and position the glass correctly.
9. Tighten the nut directly above the disc to fix the glass assembly firmly in position.