AWA24R/AW24RUR User Manual 2.
.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual Introduction One of the bottlenecks that many product developers encounter in incorporating any radio communication device is facing the legal aspect of qualifying the products and going to market without encountering legal problems. The Telecommunication Certification Body (TCB) authorization process in the United States offers manufacturers more than one approval body.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual Table of Content Page 1.0 Eligibility Requirements for Regulatory Module Approval………………………………. 4 2.0 User Guide Information………………………………………………………………………… 5 3.0 United States Regulatory FCC Modular Approval (MA)…………………………..………. 5 3.1 Antenna Regulation………………………………………..……………………………. 5 3.2 Emissions Compliance Testing……………………………………………………..... 6 3.3 Working with Additional Transmitters……………….……………………………… 6 3.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual 1.0 Eligibility Requirements for Regulatory Module Approval The Artaflex 2.4GHz DSSS SPI Radio with 2.15 dBi gain dipole antenna module (AWA24R/AW24RUR) is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate AWA24R/AW24RUR throughout the world.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual section provided they accept full responsibility for regulatory type-approval of the electronic device with an integrated Artaflex AWA24R/AW24RUR wireless module. 2.0 User Guide Information Electronic device manufacturers using Artaflex’s Modular Approval are required to place the below text in their product user’s guide in accompaniment with other regulatory information.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual authorized use. Use of any other antenna type in the AWA24R/AW24RUR voids the MA grant for that AWA24R/AW24RUR. 3.2 Emissions Compliance Testing Notwithstanding the Modular Approval for the Radio Device with associated antenna, the end product configuration must meet digital emissions compliance and must be tested in accordance with FCC Part 15 requirements confirming radiated emissions are within specified limits.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual 3.4 Product Labeling Requirements FCC product labeling requirements stipulate an FCC label, including specific text, be placed on the device containing the AWA24R/AW24RUR module. The product label must include the following text and must be affixed to the exterior of the OEM’s product. The text should be located beneath the FCC compliance logo.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual Industry Canada regulatory approval typically conforms to the FCC in terms of emission levels and other regulatory requirements. It is the position of the Industry Canada agency that the OEM is primarily responsible for ensuring end product compliance. Artaflex as grantee and supplier of the module maintains responsibility for the Modular Approved design.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual 5.1 Product Labeling Requirements European Union product labeling requirements stipulate specific text is placed on the device containing the AWA24R/AW24RUR module. The product must include the following text and must be located on the exterior of the OEM’s product. The same information may be included in the product user manual, however is not mandatory.
2.4GHz DSSS SPI Radio with Integrated Power AmplifierAWA24R/AW24RUR User Manual This list will be updated to reflect additional grants obtained or needed in future revisions. Note: As of the date of publication, Japan does not recognize the “Modular Approval” certification. Regulatory certification for Japan (TELEC) must be acquired through typical approval procedures. These approvals are the sole responsibility of the OEM. Artaflex Inc.
