User's Manual

2.4GHz DSSS SPI Radio with Integrated Print Antenna AW24MCHL
User Manual
Artaflex Inc. UM AW24MCHL Rev 1v0
215 Konrad Crescent Revised April 22, 2009
Markham, Ontario, Canada
L3R8T9 Page 8 of 10
http://www.artaflexmodules.com
905-479-0148
4.1 Product Labeling Requirements
Industry Canada product labeling requirements stipulate specific text be placed on the device
containing the AW24MCHL module. The product must include the following text and must be
located on the exterior of the OEM’s product. This same information must be included in the
product user manual.
“This product contains Artaflex AW24MCHL Transmitter Module
Canadian Cert No IC: 6779A-AW24MCHL”
5.0 European Union Regulatory Approval
The European Union generally follows the guidelines of the FCC for emissions level requirements.
FCC end-product compliance certification results, if available, may be used to satisfy EU
requirements (Substitution Method). Please consult the ETSI EN 300 328 specifications to confirm
inter-agency compliance. If comparable FCC testing has not been performed or if the specifications
are not cross compliant, ETSI EN 300 328 testing will be required. Additionally, testing to the ETSI
EN 301 489-1 & ETSI EN 301 489-7 (immunity testing) is strongly recommended. Artaflex
assumes no responsibility for compliance of the end-product configuration.
5.1 Product Labeling Requirements
European Union product labeling requirements stipulate specific text is placed on the device
containing the AW24MCHL module. The product must include the following text and must be
located on the exterior of the OEM’s product. The same information may be included in the product
user manual, however is not mandatory. Packaging and user documentation must indicate the use
restrictions of the end-product (i.e. countries disallowing the operating frequencies of the
AW24MCHL). The end-product must be labeled "CE”.