Instructions / Assembly

Measure the area to be covered. Lay out the entire project on a flat surface

before installing the tiles to be sure you have enough tiles and your design is

correct. Using a chalk line, create at least one vertical and one horizontal

reference lines to guide tile placement.

Install The First Tile

Keep the wall clean and dry. Remove

the film backing from both sides of the

tile. Lightly place the tile onto the wall

using your reference lines. Do not

apply pressure to the tile until you are

sure of your placement. The aggressive

design of the adhesive right position,

firmly apply even pressure across the

entire tile.

CAUTION: Place release paper in a

wastebasket immediately upon

removal from tile.

Lay out & measure

The adhesive on the back

of the Atpalas Peel &

Stick Tiles is extra sticky

and pressure sensitive.