Specifications

42

 DISPLAYED TEXT  ACTUAL NAME  MIDI CONTROLLER # 

 MODWHEEL  Modulation Wheel  001 
 BREATH  Breath Controller  002 
 FOOTCTLR  Foot Controller  004 
 PORTAtim  Portamento Time  005 
 DATA msb  Data Entry MSB  006 
 MAIN VOL  Main Volume  007 
 BALANCE  Balance  008 
 PAN  Pan  010/0Ah 
 EXP CTLR  Expression Controller 011/0Bh 
 GENERAL1  General Purpose #1  016/20h 
 GENERAL2  General Purpose #2  017/11h 
 GENERAL3  General Purpose #3  018/12h 
 GENERAL4  General Purpose #4  019/13h 
 DAMP PED  Damper Pedal  064/40h 
 PORTAMEN  Portamento  065/41h 
 SOSTENUT  Sostenuto  066/42h 
 SOFTPEDL  Soft Pedal  067/43h 
 HOLD 2  Hold 2  069/45h 
 GENERAL5  General Purpose #5  080/50h 
 GENERAL6  General Purpose #6  081/51h 
 GENERAL7  General Purpose #7  082/52h 
 GENERAL8  General Purpose #8  083/53h 
 ExtFXdpt  External Effects Dept 091/5Bh 
 TREM dpt  Tremolo Depth  092/5Ch 
 CHOR dpt  Chorus Depth  093/5Dh 
 CELESdpt  Celeste Depth  094/5Eh 
 PHASEdpt  Phaser Depth  095/5Fh 

NOTES:
1) The only accidental displayed is the sharp, "#".
2) PROGRAM CHANGE events: The actual program number specified in the event is a
0-origin number and will be displayed as such, consistent with the unit's display
of program numbers under the MIDI PROGRAM TABLE MIDI menu item. A MIDI program
change event to program #5 is actually a message to go to (excluding mapping via
MIDI PROGRAM TABLE) to program #6!
3) MIDI CHANNEL#s: The display "CHnn" (where "nn" is the channel# associated with
a particular MIDI event) shows the channel# as a 1-origin number. A MIDI event
with a channel# value of 2 will display as "CH03"!
4) If, while in MEM mode, the unit is enabled to respond to PROGRAM CHANGE events
(and those events occur on the same channel on which the unit is listening) and
such an event occurs which causes the unit to switch to a preset that has the
SAMPLER effect, a message may display for a few moments indicating that the
SAMPLER is RECORD-READY. When this message (or others) is finished, the display
will return to the most recent event and display mode.
5) The SGX NIGHTBASS does not provide circuitry for the Main Volume controller
directly.