Specifications

SIGNAL FREQUENCY SHAPING ALGORITHMS

EQUALIZER (SEVEN BAND EQUALIZER)

[EQUALIZER],[EQL]

Parameters:

40Hz [0dB] (+/-) 2,4,6,9,12,15 dB

100Hz [0dB] (+/-) 2,4,6,9,12,15 dB

250Hz [0dB] (+/-) 2,4,6,9,12,15 dB

640Hz [0dB] (+/-) 2,4,6,9,12,15 dB

1.6KHz [0dB] (+/-) 2,4,6,9,12,15 dB

4KHz [0dB] (+/-) 2,4,6,9,12,15 dB

10KHz [0dB] (+/-) 2,4,6,9,12,15 dB

The Seven band Equalizer is located directly after the Digital Processor Input

slide control. Each band may be adjusted plus or minus 15dB in twelve steps. Use

the Equalizer to EQ the signal before it is sent to the digital effects.

Levels of the bands are displayed in the LCD both by a complete bar graph display

of all bands and the actual frequency with level setting. The LCD will display

information like the following diagrams.



 40Hz _______ all bands flat

 0db _  ready to set 40Hz band



 40Hz  ______ 40Hz band (+)15dB

 +15db _ 



 100Hz  ______ 40Hz band (+)15dB, 100Hz band (-)15dB

 -15db   ready to set 100Hz band



 10KHz  ___ 40Hz,100Hz,640Hz band (+)6dB, 250Hz (+)15dB

 0db _ ready to set 10Khz band



ACOUSTIC ENVIRONMENT SIMULATOR

[ACU-ENV-SIM], [AES]

Parameter:

[OFF] OFF, DEAD ROOM, HEAVY CARPET, WOOD/RUG MIX, DRAPE/CARPET,

WOOD + TILE, PEWS/PEOPLE, WOOD BAFFLES, LT FLOOR RUG, CEILING DRAPE, STONE

CEILING, WALL DRAPES, NATURAL WOOD, OPEN AMBNCE

The Acoustic Environment Simulator (AES) allows you to simulate adding in baffles

or sound absorption materials to alter the high end response of your signal. Of

course this is a logical as well as necessary option, the NIGHTBASS reproduces

sound to 20KHz, well above normal natural ambiance.