Specifications

13
NOTE: Before you start building your own presets, read the section "Level
Programming Hints for Building Your Own Presets" in Appendix A.
DELETE EFFECT
Pressing the DELETE EFFECT button once opens the Delete Effect function.
To delete an effect from a preset, press this button and use the Encoder to
select the effect you want deleted. Turn the Encoder left or right to scan
through your selections. Finalize the DELETE EFFECT command (delete the effect
from the chain) by pressing the ENTER button. Doing this deletes the effect
temporarily from memory. If audio is passing through the NIGHTBASS, you will hear
the change when you press the ENTER button. Press the STORE button to make the
change permanent.
To close the Delete Effect function and escape to Edit Mode, press the button
once or press the Edit Mode button.
The DELETE EFFECT button is also used in TITLE EDIT Mode to subtract characters
and spaces from the title.
Deleting Effects From a Preset
When you see text within the [ ] brackets, it is describing the text as it
appears in the LCD.
Recall preset 151.
-Press the EDIT MODE button
-Press the DELETE EFFECT once. [DEL:COMPRESSOR?]
*Do you want to delete the compressor? NO.
-Turn the Encoder knob to the right until you see [DEL:ACU ENV SIM?]
*Let's delete this effect.
-Press ENTER, [3 CMP+PTr+REV].
*The effect has been eliminated but not permanently. You will
audibly hear the sound change when the effect is deleted.
*Press STORE to make this change permanent.
-Press STORE now.
With the elimination of an effect, you open up a space to insert
another effect or leave things as they are.
If you press the DELETE EFFECT button and there are no effects in the preset, the
display will read [DEL:NO FX TO DEL].
STORE
Any time you wish to permanently save parameter values in a preset, press the
STORE button. All parameter values you have set will be stored into the preset as
well as TITLE, MIX, and ON/OFF Controllers information. When you press the STORE
button the LCD will display [PRESET STORED]. If the phrase [LOCKED/SELECT
LOCATION 115-200] appears don't panic, presets 1 through 115 are factory presets
and though the parameters may be changed, the new values cannot be stored without
first UNLOCKING the presets (see UTILITY section).
TO DELETE A STORED PRESET, thereby releasing its memory to be used again, you
must store a null preset at the preset number you wish to delete. A null preset
consists of a blank title (all spaces, displayed as <blank title>) and no effects
(displayed as <no effects>). Factory Preset 100 is programmed blank to make it