User Manual

10
SPECIFICATIONS
Input Connections XLR balanced / ¼-inch unbalanced “Combo” jack (Ch1&2 inputs)
¼-inch balanced or unbalanced (Ch3-Ch4 inputs)
RCA unbalanced (Ch5-Ch6)
RCA Tape loop In Left and Right
Output Connections ¼-inch TRS balanced (Main Mix outputs)
¼-inch TRS stereo (Monitor output)
RCA Tape loop Out Left and Right
Input Impedance 240k Ohms (Inst-HiZ), 20k Ohms (Line) (Ch1-Ch2, Ch3-Ch4 ¼-inch inputs)
(Ch5-Ch6 RCA inputs)
>4k Ohms (Ch1-Ch2 XLR input)
Output Impedance <1k Ohms (balanced¼-inch ), <500 Ohms (unbalanced ¼-inch)
<500 Ohms (unbalanced RCA)
100 Ohms (Monitor output)
Frequency Response 0 Hz – 20 kHz (+0, -1 dB)
THD <0.01% @ 1 kHz
CMRR >60dB typical
Phase Response All connections are phase coherent
Signal to Noise Ratio 90dB typical (Ref 0dBu)
Equivalent Input Noise 120dBu typical (XLR bal, max gain), -125dBu typical (¼-inch & RCA)
Maximum Input Level +4dBu (XLR input), +20dBu (¼-inch input), 18dBu (RAC)
Maximum Output Level +20dBu (Main Mix, AUX outputs), +20dBu (Monitor)
Maximum Gain
(In to Main Out) +54dB (XLR), +39dB (¼-inch) (CH1&CH2)
+10dB (¼-inch) (Ch3-Ch4)
+11dB (RCA) (Ch5-Ch6)
(In to USB) +44dB (XLR), +30dB (¼-inch unbal) (CH1&CH2)
+0dB (¼-inch) (Ch3-Ch4)
+6dB (RCA) (Ch5-Ch6)
+8dB (RCA) (AUX IN L&R)
(USB to Out) +14dB (Main Mix), +14dB (Monitor)
Phantom Power selectable, +48V DC, filtered, current limited
A/D-D/A 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer
0.4 ms A/D latency @ 44.1 kHz
Computer Interface USB Class compliant plug-and-play Mac and PC interface
Chassis Type All steel black finish
Power Requirements 15VAC @ <500 mA (external) (Adaptor Included)
Dimensions (HWD) 1.9” x 7.4” x 8.5”
47mm x 186mm x 215mm
Weight 3.24 lbs. (1.47 kg) with power supply and USB cable
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement. Therefore, specifications are subject to change without notice.
Go to
www.artproaudio.com
for the latest information and support.